Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulb on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Headlight bulb

This guide shows how to replace the position light bulb on a Jeep Renegade. The first step is to turn the wheels to reveal a small access panel in the wheel arch. Unscrew the screws and remove the cover to access the light connectors. The one to replace is the innermost and black in colour. Remove it by turning it to the left; replace the bulb after detaching the old bulb with a bayonet fitting. At this point, you can reattach the plastic cover of the compartment. Check the correct operation of the lights before moving the vehicle.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Lights on a Jeep Renegade?
How to Replace the Position Lights on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Replacing the daytime running lights on a Jeep Renegade is a very easy and quick operation that does not require workshop intervention. You simply ne…
Replacing the Number Plate Lights on a Jeep Renegade
Replacing the Number Plate Lights on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, learn how to replace the number plate bulbs on a Jeep Renegade. Use a screwdriver to remove the number plate light unit located in the…
Replacing the number plate lights on the Jeep Renegade
Replacing the number plate lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will see the main steps to disassemble and replace the rear number plate bulbs on the Jeep Renegade, following the instru…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos