Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Lights on a Jeep Renegade?

Model: Jeep Renegade - Years 2014-2021
Part: Light bulb

Replacing the daytime running lights on a Jeep Renegade is a very easy and quick operation that does not require workshop intervention. You simply need a cross-head screwdriver and, of course, a new bulb. First, create space by steering the wheel on the side you are working on outwards, and locate the cover situated at the front of the wheel arch. Open it by removing the two screws and identify the bulb directly in front. At this point, proceed to replace the bulb by turning it counterclockwise to remove it and clockwise to secure it.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Light Bulbs on a Jeep Renegade?
How to Replace the Position Light Bulbs on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) As shown in this tutorial, replacing the position light bulbs on a Jeep Renegade is a very simple and quick task. Before proceeding, ensure that the …
How to Replace the Position Light Bulb on a Jeep Renegade
How to Replace the Position Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) This guide shows how to replace the position light bulb on a Jeep Renegade. The first step is to turn the wheels to reveal a small access panel in th…
Replacing the Position LED on a Jeep Renegade
Replacing the Position LED on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the position lights on a Jeep Renegade, start by accessing the wheel arch liner from the side of the affected headlamp. Unscrew the two pl…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - How to change front turn signal bulb on Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos