Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Position LED on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Headlight bulb

To replace the position lights on a Jeep Renegade, start by accessing the wheel arch liner from the side of the affected headlamp. Unscrew the two plastic bolts securing the lamp in that area and detach the plastic. This will allow you to access the LED area. Carefully insert your arm (it’s not in a very accessible position) and slightly rotate the connector clockwise, then pull it out of the housing. Similarly, slightly rotate the LED and remove it from the connector. Insert the new part you purchased and reassemble everything in reverse order.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the original halogen bulbs in a Jeep Renegade with new LED bulbs, first open the bonnet and access the rear of the light corresponding to …
How to Remove the Interior Light on a Jeep Renegade
How to Remove the Interior Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Here’s how to remove and replace the bulbs/LEDs in the interior light of a Jeep Renegade: use a screwdriver or plastic lever to pry between the cover…
Replacing the number plate lights on the Jeep Renegade
Replacing the number plate lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will see the main steps to disassemble and replace the rear number plate bulbs on the Jeep Renegade, following the instru…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos