Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?

Model: Jeep Renegade - Years 2014-2021
Part: Light bulb

To replace the original halogen bulbs in a Jeep Renegade with new LED bulbs, first open the bonnet and access the rear of the light corresponding to the bulb to be replaced. Here, disconnect the connector attached to the bulb and remove the bulb from its housing. At this point, connect the new LED bulb to the connector and insert it into its housing at the back of the light. After inserting the bulb, close the bonnet and check that everything is functioning.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Number Plate Light Unit on a Jeep Renegade
How to Remove the Number Plate Light Unit on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you replace the number plate light bulb on a Jeep Renegade? Use a screwdriver or plastic trim tool to remove the number plate light located in…
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…
How to Replace the Front Headlamp Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To correctly replace the front headlamp bulb on your Jeep Renegade, it only takes a few minutes. First, unlock the front bonnet using the button loca…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - How to change front turn signal bulb on Jeep Renegade? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos