Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Interior dome light bulb

Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the panel), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips are fully engaged in the side plastic). Test the correct operation of the bulbs in the interior light after installation.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Interior Light on a Jeep Renegade
How to Remove the Interior Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Here’s how to remove and replace the bulbs/LEDs in the interior light of a Jeep Renegade: use a screwdriver or plastic lever to pry between the cover…
Replacing the number plate lights on the Jeep Renegade
Replacing the number plate lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will see the main steps to disassemble and replace the rear number plate bulbs on the Jeep Renegade, following the instru…
How to Replace the Rear Light Bulbs on a Jeep Renegade
How to Replace the Rear Light Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Are the rear lights on your car not working anymore? Follow this guide to remove the light unit from a Jeep Renegade and replace the bulbs. Open the …

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos