Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Interior Light Bulb in a Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

Video tutorial

In this video, see how to remove the interior light in a Jeep Renegade if it is necessary to replace the light bulb. To do this, use something that can fit into the light and lever it downwards; when the light has opened slightly, pull down with your fingers.

Once the light bulb has been replaced, reinsert it by applying some pressure to secure the retaining clips, and the light will be functional and secure in its housing again. This operation will take just a few minutes to complete.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

Jeep Renegade (2014-2024 / ) For many cars produced and on the road, replacing a headlight bulb follows a procedure similar to what this video shows, fortunately defined as very …
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - What does the "side distance warning not available" message mean in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - How to deactivate the Start / Stop in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - Why does the Start & Stop in the Jeep Renegade no longer work? Read answer
    • Jeep Renegade 2014-2026 - What does the Jeep Renegade "Start & Stop not available" mean? Read answer
    • Jeep Renegade 2014-2026 - Where can a Jeep Renegade be serviced? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos