Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Instrument panel light

Here’s how to remove and replace the bulbs/LEDs in the interior light of a Jeep Renegade: use a screwdriver or plastic lever to pry between the cover of the interior light and the light itself (without breaking the plastics). Pull out the removed glass from the interior light, then remove the bulbs/LEDs and replace them with new ones of the same size and voltage. Refit the plastic with the glass into the interior light (push it in with your hands until the plastics are fully secured). Test the correct operation of the light before refitting the piece. Finally, reassemble the glass.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light on a Jeep Renegade
How to Remove the Third Brake Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this guide, follow the instructions to remove the third brake light on the Jeep Renegade in simple steps. First, open the boot and get a 10 mm spa…
Replacing the Number Plate Lights on a Jeep Renegade
Replacing the Number Plate Lights on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, learn how to replace the number plate bulbs on a Jeep Renegade. Use a screwdriver to remove the number plate light unit located in the…
How to Replace the Ignition Coils on a Jeep Renegade
How to Replace the Ignition Coils on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Let's see how to replace the ignition coils on a Jeep Renegade: start by removing the engine cover, held by a 10 mm bolt (near the oil filler); the r…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos