Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Coils on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Ignition coil

Let's see how to replace the ignition coils on a Jeep Renegade: start by removing the engine cover, held by a 10 mm bolt (near the oil filler); the rest are plastic clips. Underneath, there are 4 individual coils (one for each cylinder), and each coil has a 10 mm fixing bolt. Unscrew and lift the coil to access the connector, then twist and pull out the coil. You can find the set of 4 coils on fruugo.it with EAN code 4713064518782 for £74.00 plus £7.99 delivery. The new coils are usually pre-lubricated, so there is no need to add dielectric grease. Align it and slide it in, insert the connector, and ensure it is securely fastened; screw in the bolt, reattach the engine cover, and you're done.

Posted on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by activating the instrument cluster by turning the key in the ignition b…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrum…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos