Do it yourself
Frequently asked questions about cars and motorcycles

Removing the rear light on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tail light

In today's video, we will see how to remove the rear light on a Jeep Renegade, in simple steps. First, open the boot and remove the side plastic cover to access the back of the light; then unscrew the plastic screw and gently pull the light out from the outside. At this point, disconnect the electrical connector for the bulbs, completely removing the light; if desired, you can proceed to replace the bulbs by following the video tutorial to the end!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, open the tailgate of your Jeep Renegade. Begin by prising off and removing the inner side cover of the boot located near the re…
Jeep Renegade (2014-2026 / 520, MK 1, BU) Are the rear lights on your car not working anymore? Follow this guide to remove the light unit from a Jeep Renegade and replace the bulbs. Open the …
Jeep Renegade (2014-2026 / 520, MK 1, BU) Replacing the fog light bulb on a Jeep Renegade is really simple, and we will show you how. Use a cross-head screwdriver and get down to work in the …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos