Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light bulb

Video tutorial

If you intend to replace one of the rear light bulbs on your Jeep Renegade yourself, simply read the following guide and apply what is described. First, purchase a new bulb that is fully compatible, then lift the rear hatch of the car and remove the plastic cover located at the side of the boot.

Next, unscrew the safety latch by turning it counter-clockwise and return to the outside of the vehicle. Then, remove the light cover and pull it towards you. Disconnect the electrical cable and proceed with replacing the bulb.

Finally, refit the light correctly.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Jeep Renegade
How to Replace the Rear Light Bulb on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) If the bulb of one of the rear lights on your Jeep Renegade has stopped working suddenly, do not worry as this guide provides all the necessary steps…
How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the original halogen bulbs in a Jeep Renegade with new LED bulbs, first open the bonnet and access the rear of the light corresponding to …
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos