Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tail light bulb

Are the rear lights on your car not working anymore? Follow this guide to remove the light unit from a Jeep Renegade and replace the bulbs. Open the boot lid, remove the plastic panel beside the trim (unscrew the plastic or metal fastener). Disconnect the rear light from its housing and replace the damaged bulbs with new ones (same size and voltage). Finally, reassemble the light unit with the associated nuts and refit the plastic cover on the trim. Test the correct operation of the previously installed bulbs.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Jeep Renegade
How to Replace the Rear Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Do you need to replace the bulbs in the rear light on a Jeep Renegade? Open the boot lid, unscrew the fastening screws located at the side of the lig…
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…
Replacing Indicator Bulb on Jeep Renegade
Replacing Indicator Bulb on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this tutorial video, you will see how to remove and replace the indicator bulb of the front light on a Jeep Renegade in simple steps. First, turn …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos