Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tail light

Before you can start, open the tailgate of your Jeep Renegade. Begin by prising off and removing the inner side cover of the boot located near the rear light, using a thin but sturdy tool to lever it off. This will expose the screw that secures the light to the vehicle. Proceed to unscrew and remove this screw. At this point, you can pull the light out of its housing, disconnect the electrical connector, and you will have completed the disassembly. To fit the new light, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the rear light on Jeep Renegade
Removing the rear light on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video, we will see how to remove the rear light on a Jeep Renegade, in simple steps. First, open the boot and remove the side plastic cove…
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…
How to Replace the Rear Light on a Jeep Renegade
How to Replace the Rear Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you remove the rear light on a Jeep Renegade? Open the boot lid, unscrew the fastening screws located at the side of the light. Detach the rea…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos