Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light Bulb on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Headlight bulb

Replacing the fog light bulb on a Jeep Renegade is really simple, and we will show you how. Use a cross-head screwdriver and get down to work in the wheel arch on the side of the affected headlamp. Here, unscrew the two plastic screws and remove the rectangular cover. Now, turn the connector in the anti-clockwise direction from the rear cover of the fog light bulb, and this will allow you to extract both the connector and the bulb itself. Finally, remove the bulb from the connector and insert the new one; you're done. Reverse the steps until fully reassembled. Cheers!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fog Light on Jeep Renegade
Replacing the Fog Light on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the fog light or bulb of the Jeep Renegade? Let’s see how to remove the cover plastics. Turn the front wheel and unscrew the securing s…
How to Change the Fog Light Bulbs on a Jeep Renegade
How to Change the Fog Light Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you change the fog light bulbs on a Jeep Renegade? Prepare to open the cover located in the plastic wheel arch liner using a suitable screwdri…
How to Replace the Fog Light Bulb on a Jeep Renegade
How to Replace the Fog Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, learn how to replace the fog light bulb on a Jeep Renegade. Start by using a suitable screwdriver to remove the plastic cover located …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos