Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Door Shell on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Door trim panel

Using a plastic wedge, remove the cover screw protection located behind the lock handle, then remove the one near the window switch buttons. Unscrew the two exposed bolts and, using the plastic wedge, detach the shell frame and unscrew all the bolts located at the bottom, as clearly shown in the video. Remove the window switch panel and disconnect its connector. Move to the side trim, which can only be accessed with the door open: here, too, remove the two cover screws and unscrew the underlying bolts. Remove the panel and disconnect the cables, then unscrew the speaker mounting bolts and, again, disconnect the cables before proceeding to reassemble.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Front Door Panel on Jeep Renegade
Remove the Front Door Panel on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the front door panel on a Jeep Renegade? Follow these steps: before starting the disassembly, disconnect the battery terminals located …
How to Remove the Door Panel on a Jeep Renegade?
How to Remove the Door Panel on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To remove the door panel on a Jeep Renegade, you need to loosen the screws that secure it to its housing: these are located in the central part of th…
Renegade Speaker Replacement
Renegade Speaker Replacement
Jeep Renegade (2014-2026 / 520, MK 1, BU) Do you want to remove the speakers from the Jeep Renegade? Here's how to take them out from inside the door panel. Disconnect the battery terminals l…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos