Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Door trim panel

Using a small flat screwdriver, remove the plastic covers near the opening handle and behind the window switch buttons. Unscrew all the screws now exposed. Next, look around the panel (underneath and also on the side area accessible only by opening the door) for any other bolts securing the panel to the door and unscrew them. Using a plastic trim tool, pry around the panel until it detaches from the door and disconnect the cables. At this point, you can also remove the speaker.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Front Door Panel on Jeep Renegade
Remove the Front Door Panel on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the front door panel on a Jeep Renegade? Follow these steps: before starting the disassembly, disconnect the battery terminals located …
How to Remove and Replace the Door Panel on the Jeep Renegade
How to Remove and Replace the Door Panel on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today's guide will show you how to remove and replace the front door panel of the Jeep Renegade. First, open the door and start unscrewing all the fi…
Removing the Door Panel (Right Side) on a Jeep Renegade
Removing the Door Panel (Right Side) on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Perform the removal of the door panel (front right) on a Jeep Renegade: disconnect the battery terminals located in the engine bay, use a screwdriver…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos