Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How to replace the oil filter on a Jeep Renegade

Jeep Renegade - Video tutorial

Model: Jeep Renegade 520, BU, MK 1 - Years 2014-2023
Part: Oil filter
Operation: How to replace the oil filter on a Jeep Renegade

Before starting, we will have to lift the front of our Jeep Renegade. Let's start by going to open the front hood, then unscrew and remove the oil filler cap. After that, we will need to place a container under the oil pan, then unscrew and remove the oil spill nut. Once this is done, we will have to wait for the oil to come out completely. At this point, we can unscrew and remove the oil filter, located near the oil pan, and we will have finished the disassembly. To fit the new oil filter, we will simply have to screw it in place of the old one. When we have completed this step, we will have finished the replacement, and we will be free to insert the new oil.


Posted on 27 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Jeep Renegade 2014-2023 - Where is the oil filter located on the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - How much does it cost to change the oil filter in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Where is the oil filter of a Jeep Renegade located? Read Answer
    • Jeep Renegade 2014-2023 - Where is the Jeep Renegade's oil filter located? Read Answer
    • Jeep Renegade 2014-2023 - Where is the Jeep Renegade's oil filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos