Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How does the tire pressure sensor work on Jeep Grand Cherokee

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Operation: How does the tire pressure sensor work on Jeep Grand Cherokee

When the pressure of one of the tires on the Jeep Grand Cherokee starts to drop, the car has a system that not only identifies which tire is losing pressure, but also how many PSI it is above normal. In any case, the pressures are indicated on the plate affixed to the thickness of the driver's side door. When this happens you still have to check the tire pressure, and remember that it varies with the outside temperature! The TMPS warning light therefore comes on only when all the tires have the wrong pressures, and it is therefore a very rare event.


Posted on 13 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - What problems on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2004-2010 - What to do when you have trouble starting on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - What problems does the Jeep Grand Cherokee Crd have? Read Answer
    • Grand Cherokee 2004-2010 - What problems on the Jeep Grand Cherokee 3 0? Read Answer
    • Grand Cherokee 2010-2021 - What are the problems of the Jeep Grand Cherokee 3.0 CRD? Read Answer
    • Grand Cherokee 2004-2010 - What is the cost of the service on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 1992-1998 - Where is the chassis of a Jeep Grand Cherokee located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos