Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Oil Filter Located on the Jeep Patriot?

Model: Jeep Patriot MK 1 - Years 2007-2017
Part: Oil filter

In this video, you will see where the oil filter is located on the Jeep Patriot and how to proceed if you need to replace it. This operation is obviously included in the oil change itself. As shown, the filter is located at the lower part of the engine and is accessible from underneath the vehicle, taking the necessary safety precautions. Before proceeding with its replacement, unscrew the drain bolt and allow all the oil in the system to drain out. Finally, reassemble everything and pour the new oil through the upper designated hole.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of a Jeep Patriot
How to Change the Engine Oil of a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) To change the engine oil of the Jeep Patriot, loosen the drain plug located at the bottom of the vehicle: once this plug is loosened, you can let all…
Where is the fuse box located in the Jeep Patriot?
Where is the fuse box located in the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the box containing the fuses of your Jeep Patriot is located, don't worry because below you will find the steps to follow to …
Where is the fuse box of the Jeep Patriot located?
Where is the fuse box of the Jeep Patriot located?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the fuse box of your Jeep Patriot is located, all you have to do is follow the procedure described in the following guide. St…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos