Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located in the Jeep Patriot?

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

Video tutorial

If you don't know where the box containing the fuses of your Jeep Patriot is located, don't worry because below you will find the steps to follow to find it in just a few minutes. Open the driver's side door and unlock the front hood opening by pressing the appropriate lever located in the lower area of the dashboard.

Then go outside and lift the hood, then locate the fuse box on the right side of the engine compartment and remove the cover, thus finally having free access to the fuses of your Jeep Patriot.


Posted on 28 July 2025 by ScegliAuto


Related tutorials

Where is the fuse box of the Jeep Patriot located?
Where is the fuse box of the Jeep Patriot located?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the fuse box of your Jeep Patriot is located, all you have to do is follow the procedure described in the following guide. St…
Where are the Fuses Located in the Jeep Patriot?
Where are the Fuses Located in the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) If you need to check the fuses after a fault in one of the devices in the Jeep Patriot, you can refer to this video which shows the diagram and where…
How to Locate the Fuses in a Jeep Patriot
How to Locate the Fuses in a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) To locate the fuses in a Jeep Patriot, open the bonnet and find the power distribution module in the engine compartment. It is located on the left si…

Other guides you may be interested in

    Frequently Asked Questions

    • Patriot 2007-2017 - Where is the alternator fuse located on the Jeep Patriot? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos