Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Kawasaki Vulcan 900

Model: Kawasaki Vulcan 900
Part: Headlight

Video tutorial

In this tutorial, see how to replace the front headlight on a Kawasaki Vulcan 900, a very simple and quick operation. First, ensure the key is not inserted for safety.

Then, position yourself in front of the headlight, locate the two side screws, and unscrew them using a standard cross-head screwdriver. Next, separate the headlight from the base, disconnect the power connector, and if necessary, transfer the bulb to the replacement.

Finally, refit the new headlight by simply following the reverse procedure.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp of the Kawasaki Vulcan 900
How to Replace the Front Headlamp of the Kawasaki Vulcan 900
Vulcan 900 This guide provides instructions for removing and replacing the front headlamp of the Kawasaki Vulcan 900 motorcycle. First, place the motorcycle on …
How to Replace the Front Headlight on a Kawasaki Vulcan 900?
How to Replace the Front Headlight on a Kawasaki Vulcan 900?
Vulcan 900 .. In this tutorial, you will see how to replace the front headlight on a Kawasaki Vulcan 900, a very simple and quick operation. First,.. …
How to Replace the Front Headlight on a Kawasaki Vulcan 900?
How to Replace the Front Headlight on a Kawasaki Vulcan 900?
Vulcan 900 .. In this tutorial, you will see how to replace the front headlight on a Kawasaki Vulcan 900, a very simple and quick operation. First,.. …

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos