Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Kawasaki ER-6N?

Model: Kawasaki Er 6n
Part: Clock

Video tutorial

In this tutorial, you will see how to set the time on the Kawasaki ER-6N, an extremely simple and quick operation to perform, for example, after replacing the battery or after switching to daylight saving time. First, insert the key, then turn on the instrument panel and, using the "MODE" button, navigate to the odometer.

Next, press and hold the "SELECT" button until the clock starts flashing, press it a second time, adjust the hour with the "MODE" button and switch to minutes with the "SELECT" button. At this point, just adjust them as well and save the setting by pressing the "SELECT" button first and then the "MODE" button.


Posted on 10 February 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Kawasaki ER-6N?
How do you replace the motor oil of the Kawasaki ER-6N?
Er 6n It will be possible to replace the engine oil on the Kawasaki ER-6N by unscrewing the drain plug of the oil pan located in the central lower part of …
How to Change the Engine Oil and Oil Filter on a Kawasaki ER-6N
How to Change the Engine Oil and Oil Filter on a Kawasaki ER-6N
Er 6n In this guide, discover the steps to perform routine maintenance by changing the engine oil and oil filter on a Kawasaki ER-6N motorcycle. First, pla…
How to replace the engine oil and oil filter on the Kawasaki ER-6N
How to replace the engine oil and oil filter on the Kawasaki ER-6N
Er 6n The procedure for replacing the engine oil and oil filter is quite simple and does not require special tools; here's how to service the Kawasaki ER-6…

How to Remove and Install the Rear Wheel of the Triumph Tiger 900

This guide briefly provides the instructions to remove and install the rear wheel of the Triumph Tiger 900. First, place your motorcycle on the centre stand and begin loosening the central bolt of the rear wheel using a socket spanner with an extension; then disconnect the brake caliper and the drive chain, gently removing the wheel, as shown in the video. At this point, if necessary, replace the tyre, sprocket, or rear brake disc; apply the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos