Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Insert the ignition key into the designated hole beneath the passenger seat and remove it. At this point, you can also remove the main seat by sliding it slightly backwards and pulling it out. Here is the battery! Once located, disassembling and replacing it will be a breeze. Start by unscrewing and disconnecting the negative terminal (always start with the negative), then repeat with the positive and unscrew the securing bolts, remove the battery, and insert the new one. Proceed in reverse for reconnecting the terminals and reassemble the seat and passenger seat; you're done.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located on the Kawasaki Ninja 650?
Where are the fuses located on the Kawasaki Ninja 650?
Ninja 650 The fuses of the Kawasaki Ninja 650 are located inside the small fuse box installed on the bike: in this model, the fuses are found immediately behin…
How to Replace the Exhaust on a Kawasaki Ninja 650
How to Replace the Exhaust on a Kawasaki Ninja 650
Ninja 650 To replace the exhaust fitted on the Kawasaki Ninja 650, loosen the screws located at the exhaust terminal supports. Once the exhaust is fully releas…
How to Change the Engine Oil in a Kawasaki Ninja 650?
How to Change the Engine Oil in a Kawasaki Ninja 650?
Ninja 650 In this tutorial, you will see how to change the engine oil in a Kawasaki Ninja 650, a very simple and quick operation. First, ensure the engine is c…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos