Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Kymco X-Town 300 Scooter

Model: Kymco X Town
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to change the engine oil in a Kymco X-Town 300 scooter, a very simple and quick operation. Before proceeding, wait for the engine to be completely cold to work safely.

Start by opening the filler cap, then position a container underneath the scooter and, using a 17mm socket spanner, unscrew the drain bolt. Once all the oil has completely drained from the system, clean the filter of any residue, tighten the bolt, and insert the required amount of oil through the upper hole.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to reset the service on the Kymco X-Town 300 scooter?
How to reset the service on the Kymco X-Town 300 scooter?
X Town .. can see how to reset the service on the Kymco X-Town 300 scooter, an extremely simple and quick operation, to be carried out only once all scheduled.. …
Replace the Rear Tyre of the Kymco X Town 300
Replace the Rear Tyre of the Kymco X Town 300
X Town .. replace the rear wheel and tyre of the Kymco X Town 300 scooter by following the instructions below. First, place the scooter on the centre stand and.. …
How to Replace the Belt on a Kymco X Town 300
How to Replace the Belt on a Kymco X Town 300
X Town .. and replace the drive belt on the Kymco X Town 300 scooter, following the instructions below. First, put the central stand down and start by unscrewing.. …

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos