Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco X Town
Part: Tires

In this video, see how to remove and replace the rear wheel and tyre of the Kymco X Town 300 scooter by following the instructions below. First, place the scooter on the centre stand and start by removing the exhaust silencer by unscrewing the fixing screws; then unscrew the screws of the brake caliper and subsequently remove the central axle of the wheel, as shown in the video. At this point, use levers to remove the tyre from the rim, replacing it with the new one, following the video tutorial to the end!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on a Kymco X Town 300
How to Replace the Belt on a Kymco X Town 300
X Town In today's tutorial video, you will learn how to dismantle and replace the drive belt on the Kymco X Town 300 scooter, following the instructions bel…
Replace the Front Brake Pads on the Kymco X Town 300
Replace the Front Brake Pads on the Kymco X Town 300
X Town Watch this video to learn how to remove and replace the front brake pads on the Kymco X Town 300 scooter in simple and quick steps. After positioning…
How to Change the Engine Oil in a Kymco X-Town 300 Scooter
How to Change the Engine Oil in a Kymco X-Town 300 Scooter
X Town In this tutorial, you will learn how to change the engine oil in a Kymco X-Town 300 scooter, a very simple and quick operation. Before proceeding, wa…

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos