Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to reset the service on the Kymco X-Town 300 scooter, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work is completed. First of all, we insert the key, then we turn on the instrument panel and, using the left button on the dashboard, we reach the odometer related to the service. We then hold down the right button, keeping it in position for the necessary time for the interval to be reset correctly and complete the procedure by restarting the panel.

Posted on 14 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Kymco X-Town 300 Scooter
How to Change the Engine Oil in a Kymco X-Town 300 Scooter
X Town .. learn how to change the engine oil in a Kymco X-Town 300 scooter, a very simple and quick operation. Before proceeding, wait for the engine to be completely.. …
Replace the Rear Tyre of the Kymco X Town 300
Replace the Rear Tyre of the Kymco X Town 300
X Town .. replace the rear wheel and tyre of the Kymco X Town 300 scooter by following the instructions below. First, place the scooter on the centre stand and.. …
Replace the Front Brake Pads on the Kymco X Town 300
Replace the Front Brake Pads on the Kymco X Town 300
X Town .. and replace the front brake pads on the Kymco X Town 300 scooter in simple and quick steps. After positioning the scooter on the centre stand, remove.. …

How to Change the Engine Oil on a Triumph Tiger 900?

To change the engine oil on the Triumph Tiger 900, follow these steps. First, ensure the engine is warm but not too hot. Lift the motorcycle on a centre or side stand to make it stable. Locate the oil drain plug on the engine casing, usually positioned on the lower side of the engine. Place an oil collection container under the drain plug and unscrew the plug to allow the used oil to drain out. Once the oil has completely drained, remove and replace the oil filter. Be sure to lubricate the sealing ring of the new filter before installing it. Reinstall the oil drain plug and ensure it is tightly secured. Next, locate the oil filler cap on the engine and remove it. Fill the engine with new engine oil, using the oil recommended in the owner's manual. Check the oil level using the dipstick and add oil if necessary to reach the correct level. Finally, screw the oil filler cap back on, start the engine, and check for any oil leaks. Recheck the oil level and add oil if necessary. Once the procedure is complete, dispose of the used oil properly at an authorised recycling centre.

Watch the video!


by ScegliAuto

More videos