Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco X Town
Part: Clock

In this tutorial, you will see how to set the time on a Kymco X-Town scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or when changing to and from daylight saving time. First, insert the key, then turn on the instrument panel and hold down the left button on the dashboard until the clock starts to flash. Next, adjust the hour with the right button, switch to minutes with the left button, and adjust them in the same way. To save the setting, simply press the left button one last time.

Posted on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Kymco X-Town 300 Scooter
How to Change the Engine Oil in a Kymco X-Town 300 Scooter
X Town In this tutorial, you will learn how to change the engine oil in a Kymco X-Town 300 scooter, a very simple and quick operation. Before proceeding, wa…
Replace the Rear Tyre of the Kymco X Town 300
Replace the Rear Tyre of the Kymco X Town 300
X Town In this video, see how to remove and replace the rear wheel and tyre of the Kymco X Town 300 scooter by following the instructions below. First, plac…
How to reset the service on the Kymco X-Town 300 scooter?
How to reset the service on the Kymco X-Town 300 scooter?
X Town In this tutorial we can see how to reset the service on the Kymco X-Town 300 scooter, an extremely simple and quick operation, to be carried out only…

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos