Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Royal Enfield Classic 350?

Model: Enfield Royal
Part: Headlight bulb

Video tutorial

Replacing the front headlamp bulb on the Royal Enfield Classic 350, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that the key is not inserted for safety.

Start by going to the front of the headlamp, then locate and unscrew the two screws on either side. Next, separate the lamp from the base, disconnect the power connector, and remove the rear rubber cover.

To extract the bulb from the housing, simply unlock the metal clip, and follow the reverse procedure to reassemble everything.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to replace the front headlight on the Royal Enfield Scram 411?
How to replace the front headlight on the Royal Enfield Scram 411?
Royal In this tutorial we can see how to replace the front headlight on the Royal Enfield Scram 411, an extremely simple and quick operation. First of all,…
How to Replace the Front Brake Pads on a Royal Enfield
How to Replace the Front Brake Pads on a Royal Enfield
Royal In this tutorial, you will see how to replace the front brake pads on a Royal Enfield, a straightforward operation that requires good manual skills. …
Front Fork Oil Change on a Royal Enfield.
Front Fork Oil Change on a Royal Enfield.
Royal For the oil change of the front fork on the Royal Enfield, place your motorcycle on a stable and secure stand to ensure the operator's safety (as sho…

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos