Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Royal
Part: Brake pads

In this tutorial, you will see how to replace the front brake pads on a Royal Enfield, a straightforward operation that requires good manual skills. First, position yourself at the front of the motorcycle, then unscrew both bolts securing the caliper to the fork. Next, detach the indicated metal clip, remove the pin, and take out the old pads. At this point, clean any dirt residue present, position the new parts, and reassemble everything following the reverse procedure. If necessary, check the level of the brake fluid.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Brake Pads on a Royal Enfield
Replacing Rear Brake Pads on a Royal Enfield
Royal Today, we will see how to remove and replace the brake pads on a Royal Enfield. First, unscrew the bolts securing the brake caliper to detach it from…
Front Fork Oil Change on a Royal Enfield.
Front Fork Oil Change on a Royal Enfield.
Royal For the oil change of the front fork on the Royal Enfield, place your motorcycle on a stable and secure stand to ensure the operator's safety (as sho…
How to Replace the Front Headlamp Bulb on the Royal Enfield Classic 350?
How to Replace the Front Headlamp Bulb on the Royal Enfield Classic 350?
Royal Replacing the front headlamp bulb on the Royal Enfield Classic 350, as shown in this tutorial, is an extremely simple and quick operation. Before pro…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos