Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight on the Royal Enfield Scram 411?

Model: Enfield Royal
Part: Headlight

Video tutorial

In this tutorial we can see how to replace the front headlight on the Royal Enfield Scram 411, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then locate the two bolts on the sides of the headlight and unscrew them using a 6mm hex key. Unscrew the lower screw with a 4mm key, remove the headlight from the housing and remove the internal cover.

At this point, we can disconnect the power connector, transfer the outer plastic ring to the replacement and mount it following the reverse procedure.


Posted on 28 January 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Royal Enfield Classic 350?
How to Replace the Front Headlamp Bulb on the Royal Enfield Classic 350?
Royal Replacing the front headlamp bulb on the Royal Enfield Classic 350, as shown in this tutorial, is an extremely simple and quick operation. Before pro…
How to Replace the Front Brake Pads on a Royal Enfield
How to Replace the Front Brake Pads on a Royal Enfield
Royal In this tutorial, you will see how to replace the front brake pads on a Royal Enfield, a straightforward operation that requires good manual skills. …
How to Change the Engine Oil in a Royal Enfield 500?
How to Change the Engine Oil in a Royal Enfield 500?
Royal In this tutorial, you will learn how to change the engine oil in a Royal Enfield 500, an extremely simple and quick operation to be performed every 1…

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos