Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco People S 50
Part: Engine

To disassemble the engine of the Kymco People S 50, you need to loosen the screws that secure the block to its housing, in the central part of the frame: you also need to disconnect the tubes and connectors so that the engine can be completely removed. The engine can now be opened by unscrewing the screws that secure the cylinder head and cylinder: the piston inside must be detached from the connecting rod in order to access the internal components. After replacing the necessary parts, the engine can be closed again to ensure everything is working properly.

Posted on 16 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Kymco People S 50
How to Start a Kymco People S 50
People S 50 Before starting, position your Kymco People S 50 on the centre stand. Begin by inserting the key into the ignition barrel and turning it fully clockw…
How to Replace the Spark Plug on a Kymco People S 50
How to Replace the Spark Plug on a Kymco People S 50
People S 50 This guide will show you how to remove and replace the spark plug on the Kymco People S 50 scooter in simple steps. First, lift the rider's seat and …

How to replace the starter motor on the GasGas EC 300

To replace the starter motor on the GasGas EC 300, detach the left side fairing of the bike, located near the bottom of the fuel tank. Once the panel is removed, you will be able to locate the starter motor, which must be removed from its housing by unscrewing the mounting screws and disconnecting the appropriate power cables. Once the old starter motor is removed, insert the new one, connecting it to the cables, securing it with bolts, and checking that everything functions correctly.

Watch the video!


by ScegliAuto

More videos