Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start a Kymco People S 50

Model: Kymco People S 50
Part: Checks and maintenance

Video tutorial

Before starting, position your Kymco People S 50 on the centre stand. Begin by inserting the key into the ignition barrel and turning it fully clockwise.

After doing this, pull and hold the brake lever, while pressing and holding the start button located under the throttle grip. Keep it pressed until the engine starts.

Once the engine is running, you can release the start button and the brake lever, and the procedure will be complete.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Kymco People S 50?
How to Dismantle the Engine of the Kymco People S 50?
People S 50 To dismantle the engine of the Kymco People S 50, loosen the screws that secure the block to its housing in the central part of the frame. You will a…
How to Replace the Spark Plug on a Kymco People S 50
How to Replace the Spark Plug on a Kymco People S 50
People S 50 This guide will show you how to remove and replace the spark plug on the Kymco People S 50 scooter in simple steps. First, lift the rider's seat and …

How to Replace the Transmission on the Sym MaxSym TL 500?

To replace the transmission on the Sym MaxSym TL 500, loosen the screws that secure the specific cover located on the right side of the bike, in the lower central area. Once the cover is removed, you will be able to locate the underlying components: the clutch and the variator can be removed from their position to allow the drive belt around them to be taken off. At this point, insert the new components, secure them, cover everything with the cover, and check its operation.

Watch the video!


by ScegliAuto

More videos