Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will show you how to remove and replace the spark plug on the Kymco People S 50 scooter in simple steps. First, lift the rider's seat and begin removing the plastic cover under the seat by unscrewing all the fixing screws. Once removed, take off the spark plug cap to access the top of the engine, as shown in the video. Now, use a socket wrench with an extension to unscrew and remove the spark plug; replace it with a new one of the same thread size, screwing it in by hand and tightening it with the wrench!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Kymco People S 50
How to Start a Kymco People S 50
People S 50 Before starting, position your Kymco People S 50 on the centre stand. Begin by inserting the key into the ignition barrel and turning it fully clockw…
How do you disassemble the engine of the Kymco People S 50?
How do you disassemble the engine of the Kymco People S 50?
People S 50 To disassemble the engine of the Kymco People S 50, you need to loosen the screws that secure the block to its housing, in the central part of the fr…

How to Replace the Clutch Cable on the KTM Duke 125

To replace the clutch cable on the KTM Duke 125, loosen the bolt that secures the end of the cable to the clutch cover located on the right side of the bike. Once this cable is disconnected, you can detach the end at the left handlebar lever. This will allow the cable to be completely removed from its housing and replaced with a new one. Ensure it is properly secured at both ends at the lever and the clutch, checking that everything functions correctly.

Watch the video!


by ScegliAuto

More videos