Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the windshield of the Suzuki V-Strom 1000?

Model: Suzuki V Strom 1000
Part: Windshield

Video tutorial

To replace the windshield of the Suzuki V-Strom 1000, you need to loosen the screws that secure the piece to its housing: these screws will be located at the side supports that attach the windshield to the front of the motorcycle. Once they have been removed, you can detach the glass and position the new replacement piece: this can now be fixed in place by inserting the screws on the outside and locking the windshield onto the supports.

After installation, you will need to check that everything is functioning correctly.


Posted on 27 February 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?
How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?
V Strom 1000 .. To replace the rear shock absorber on a Suzuki V-Strom 1000, loosen the bolts securing it to its housing, which is located in the central part of the.. …
How to Replace the Headlamp Bulb on the Suzuki V-Strom 1000
How to Replace the Headlamp Bulb on the Suzuki V-Strom 1000
V Strom 1000 .. To replace the headlamp bulb on the Suzuki V-Strom 1000, access the internal part of the front fairing: here you will find the internal protection.. …
How to Replace the Front Brake Pads on a Suzuki V-Strom 1000
How to Replace the Front Brake Pads on a Suzuki V-Strom 1000
V Strom 1000 .. To replace the front brake pads on a Suzuki V-Strom 1000, loosen the bolts that secure the brake caliper to the corresponding disc. Once the caliper.. …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos