Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?

Model: Suzuki V Strom 1000
Part: Shocks

Video tutorial

To replace the rear shock absorber on a Suzuki V-Strom 1000, loosen the bolts securing it to its housing, which is located in the central part of the motorcycle, just under the rear mudguard and above the rear swingarm. Once the upper and lower bolts of the shock absorber are loosened, it can be extracted from its housing and replaced with a new spare part.

At this point, refit the new shock absorber in its housing to ensure everything functions correctly.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How do you replace the windshield of the Suzuki V-Strom 1000?
How do you replace the windshield of the Suzuki V-Strom 1000?
V Strom 1000 .. To replace the windshield of the Suzuki V-Strom 1000, you need to loosen the screws that secure the piece to its housing: these screws will be.. …
How to Replace the Headlamp Bulb on the Suzuki V-Strom 1000
How to Replace the Headlamp Bulb on the Suzuki V-Strom 1000
V Strom 1000 .. To replace the headlamp bulb on the Suzuki V-Strom 1000, access the internal part of the front fairing: here you will find the internal protection.. …
How to Replace the Rear Brake Pads on a Suzuki V-Strom 1000
How to Replace the Rear Brake Pads on a Suzuki V-Strom 1000
V Strom 1000 .. To replace the rear brake pads on a Suzuki V-Strom 1000, loosen the screws that secure the corresponding brake caliper so that it can be removed from.. …

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos