Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on the Suzuki V-Strom 1000

Model: Suzuki V Strom 1000
Part: Tail light bulb

Video tutorial

To replace the headlamp bulb on the Suzuki V-Strom 1000, access the internal part of the front fairing: here you will find the internal protection panel of the headlamp. This must be removed to take out the bulb inside, disconnecting the appropriate connector as well.

At this point, you can completely remove the old bulb, connect the new one to the connector, and insert it into its housing. Then, close the headlamp with the corresponding panel, ensuring everything functions correctly.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Suzuki V-Strom 1000
How to Replace the Front Headlight Bulb on the Suzuki V-Strom 1000
V Strom 1000 .. replace the front headlight bulb on the Suzuki V-Strom 1000, a very simple and quick operation. First, ensure the key is not inserted, then remove the.. …
How to Replace the Clutch on a Suzuki V-Strom 1000?
How to Replace the Clutch on a Suzuki V-Strom 1000?
V Strom 1000 To replace the clutch on the Suzuki V-Strom, you need to loosen the bolts securing the clutch cover located on the right side of the bike. Once the b…
How do you replace the windshield of the Suzuki V-Strom 1000?
How do you replace the windshield of the Suzuki V-Strom 1000?
V Strom 1000 .. To replace the windshield of the Suzuki V-Strom 1000, you need to loosen the screws that secure the piece to its housing: these screws will be.. …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos