Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the front headlight bulb on the Suzuki V-Strom 1000, a very simple and quick operation. First, ensure the key is not inserted, then remove the two plastic rivets located at the top edge of the dashboard, unscrew the lower bolts with a 4mm hex key, and separate the dashboard from the handlebars. Next, remove the central rubber cap, disconnect the power connector, and unclip the metal clip. At this point, simply remove the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.

Posted on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Suzuki V-Strom 1000?
How do you replace the headlight bulb of the Suzuki V-Strom 1000?
V Strom 1000 .. to replace the headlight bulb of the Suzuki V-Strom 1000, you need to access the inside of the front fairing: here you will be able to locate the internal.. …
How do you replace the windshield of the Suzuki V-Strom 1000?
How do you replace the windshield of the Suzuki V-Strom 1000?
V Strom 1000 .. To replace the windshield of the Suzuki V-Strom 1000, you need to loosen the screws that secure the piece to its housing: these screws will be.. …
How do you replace the front brake pads of the Suzuki V-Strom 1000?
How do you replace the front brake pads of the Suzuki V-Strom 1000?
V Strom 1000 .. to replace the front brake pads of the Suzuki V-Strom 1000, you need to loosen the screws that secure the brake caliper to the corresponding disc: once.. …

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos