Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Yamaha Xmax 300

Model: Yamaha Xmax 300
Part: Service warning light

Video tutorial

To reset the Oil Service light on the Yamaha Xmax 300, turn on the instrument cluster so you can navigate the onboard computer menu using the TRIP button located at the base of the right-hand dial. Scroll until you find the option showing the remaining oil life: at this point, press the TRIP button again until the light starts to flash.

Now release the button and press it again for a few seconds: this will completely reset the light.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Yamaha Xmax 300
How to reset the service light on the Yamaha Xmax 300
Xmax 300 Below is the procedure to reset the maintenance light for the engine oil change on the Yamaha Xmax 300 scooter. First, place the scooter on the centr…
How to Reset the Service Light on a Yamaha Xmax 300?
How to Reset the Service Light on a Yamaha Xmax 300?
Xmax 300 To reset the Service light on a Yamaha Xmax 300, turn on the instrument cluster by rotating the key in the ignition switch: once the cluster is on, n…
How to Reset the "Service" Light on a Yamaha Xmax 300
How to Reset the "Service" Light on a Yamaha Xmax 300
Xmax 300 Before you begin, sit on the seat of your Yamaha Xmax 300. Start by activating the instrument panel by turning the key in the ignition switch. Then, …

How to Replace the Headlight Bulb on a Honda CBR 300?

To replace the headlight bulb on a Honda CBR 300, start by turning the handlebars in the opposite direction to the side where you need to replace the bulb to facilitate access. Next, remove the internal rear cover of the headlight, which is usually secured with screws or clips. Once the cover is removed, you will have access to the bulb. Gently disconnect the electrical connector from the bulb, then turn the bulb counterclockwise to unlock it from the holder. Carefully pull the bulb out of the holder and replace it with a new bulb of the same type and model. Ensure the new bulb is correctly installed in the holder and reconnect the electrical connector. Finally, replace the internal rear cover of the headlight and secure it firmly with the screws or clips. Return the handlebars to their original position, and the job is complete.

Watch the video!


by ScegliAuto

More videos