Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the bulb on a Kawasaki Versys 650, remove the rubber protective cap located between the handlebars and the dashboard, disconnecting the connector as well. To release the bulb, press the spring with your finger, which will now be visible, as shown in the video. Take care when extracting the bulb, as there is limited space to perform the operation. Once the old bulb is removed, insert a new one into the designated socket. Finally, reconnect the connector and reposition the rubber protective cap.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Kawasaki Versys 650
How to Replace the Headlight Bulb on a Kawasaki Versys 650
Versys To replace the headlight bulb on a Kawasaki Versys 650, loosen the screws that secure the side fairing of the fuel tank. Once this fairing is removed…
How to Replace the Bulb on the Kawasaki Versys 650?
How to Replace the Bulb on the Kawasaki Versys 650?
Versys To replace the bulb on the Kawasaki Versys, unclip the fastening rivets located at the sides of the fairing so that the front fairing under the winds…
Battery Replacement on Kawasaki Versys 650
Battery Replacement on Kawasaki Versys 650
Versys Insert the ignition key into the designated slot on the side fairing, then remove the seat from the motorcycle. There you go! This operation will hel…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos