Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kawasaki
    3. :
  3. Z900
    4. : How to reset the Kawasaki Z900 engine oil change light

Model: Kawasaki Z900
Part: Instrument cluster
How to reset the Kawasaki Z900 engine oil change light

The guide shows how to reset the engine oil change light on Kawasaki Z900. After replacing the lubricating fluid, it is necessary to operate on the keys on the display. With the instrument panel turned on, press and hold the two buttons simultaneously until the service menu appears. Using the left button, go down to the item â € œServiceâ € and access it with the right button. Turn off the item relating to oil change and then reactivate it. Exit the menu by holding down the two keys at the same time. Switch off the instrument panel and switch it on again to check the correct reset of the warning light.


Posted on 15 November 2022 by ScegliAuto

How do you bleed the Gilera Nexus 500 brakes?

In order to bleed the Gilera Nexus 500 brakes, you need to open the drawer that is located in correspondence with the knob, unscrewing the fixing screws of the cover. Once this has been opened, it will be possible to insert a small tube inside the vent on the brake caliper: therefore, by opening the valve, the brake fluid can be collected inside a container. When all the fluid has flowed out, it will be possible to fill in the new brake oil from the vent that was previously opened by removing the cover next to the knob.

Watch the video!


by ScegliAuto

More videos