Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Kawasaki Z800?

Model: Kawasaki Z800
Part: Engine oil

Video tutorial

To change the engine oil of a Kawasaki Z800, start with the vehicle on a level surface and ensure the engine is cold. Lift the bike using a centre stand or suitable platform to access the underside of the engine.

Locate the oil drain plug at the bottom of the sump. Position a collection container under the plug and remove it with an appropriate spanner, allowing the old oil to drain completely.

Once the oil has fully drained, refit the drain plug and tighten it to the manufacturer's specified torque. Proceed to add the new oil by pouring it through the filler cap located at the top of the engine.

Ensure you use the type and quantity of oil specified in the owner's manual. After filling, make sure the filler cap is securely fastened.

Start the engine and let it run for a few minutes to allow the oil to circulate, then turn it off and check for any leaks. Finally, check the oil level and add more if necessary before lowering the bike and ensuring everything is in order.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Kawasaki Z800?
How to replace the engine oil in the Kawasaki Z800?
Z800 In this tutorial we can see how to replace the motor oil in the Kawasaki Z800, an extremely simple and fast operation. First of all, make sure that t…
How to Change the Engine Oil in the Kawasaki Z800?
How to Change the Engine Oil in the Kawasaki Z800?
Z800 In this tutorial, you will see how to change the engine oil in the Kawasaki Z800, a very simple and quick operation. First, ensure the engine is cool…
How to change the engine oil in a Kawasaki Z800?
How to change the engine oil in a Kawasaki Z800?
Z800 In this tutorial, you will learn how to change the engine oil in a Kawasaki Z800, a very simple and quick operation. First, ensure that the engine is…

How to Replace the Rear Light Bulb on a Piaggio Vespa PX 125?

To replace the rear light bulb on the Piaggio Vespa PX 125, loosen the screws that secure the light unit to its housing: these screws are located on both sides of the light. Once loosened, you can completely detach the light unit from its position and locate the bulbs underneath: these can now be disconnected from their connector and replaced with new spare parts. Insert the new bulbs, ensuring everything functions correctly, and reattach the light unit.

Watch the video!


by ScegliAuto

More videos