Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant in a Kawasaki Z650

Model: Kawasaki Z650
Part: Antifreeze coolant

Video tutorial

The following steps will show you how to replace the engine coolant in the Kawasaki Z650. First, place the bike on a stand and start disconnecting the radiator hose, allowing the fluid to drain into a container for about ten minutes; then remove the plastic cover on the left to access the coolant reservoir, as shown in the video.

Now, unscrew the cap and top up with antifreeze, filling to the maximum level mark; start the engine and top up again if necessary!


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Z650 This guide outlines the steps to remove and replace the rear wheel or tyre on a Kawasaki Z650. First, place the motorcycle on a stand and lift the re…
Z650 To replace the brake and clutch levers on a Kawasaki Z650, loosen the nut located at the bottom of the pin that secures the lever to its housing. Onc…
Z650 In this new mini guide dedicated to your Kawasaki Z650, discover the steps you need to take to manually change the time displayed on the central dash…

How to Replace the Air Filter of the KTM 390 Adventure?

To replace the air filter of the KTM 390 Adventure, you need to detach the rear part of the seat to access the screws that secure it to its housing. Once the seat is released, you can access the components underneath, locating the cover of the filter box: by unscrewing these screws, the cover can be removed, and you can pull out the filter inside. Once the old filter is removed, insert the new replacement part and cover everything back with the seat.

Watch the video!


by ScegliAuto

More videos