|
Do it yourself
| |||
| ||||
Model: Keeway Rkv 125
To replace the rear shock absorber of the Keeway RKV 125, you need to loosen the screws that secure it to its housing: these will be located at the rear swingarm and the rear fender. Once the screws have been loosened, you can proceed to detach the old shock absorber and insert the new replacement part: this can be secured with the corresponding screws, and you can then carry out the same procedure on the other side. After the replacement, you can check that the motorcycle is stable.
Posted on 19 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Rkv 125
To replace the chain on the Keeway RKV 125, you need to unscrew the screws that secure the plastic cover located near the sprocket on the left side o…
Rkv 125
In order to replace the battery of the Keeway RKV 125, you will need to loosen the screws that secure the seat from the rear and side parts of its ho…
Rkv 125
To replace the exhaust of the Keeway RKV 125, loosen the screws securing it to its housing on the right side of the bike near the rear wheel. Once th…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.289
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
