Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the headlight bulb of the Yamaha TW 200, you will need to loosen the screws that secure the front panel of the vehicle to its housing: these screws will be located on the sides and inside the panel itself. Once the panel is removed, you can loosen the screws that secure the headlight assembly in order to remove it and disconnect the internal connector: the bulb in the headlight can now be removed and replaced with a new replacement piece. Finally, you can secure it back to its housing and reinsert the headlight assembly.

Posted on 18 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb in the Yamaha TW 200?
How to replace the headlight bulb in the Yamaha TW 200?
Tw 200 In this tutorial, we can see how to replace the headlight bulb on the Yamaha TW 200, a very simple and quick operation. First of all, make sure that …
How do you replace the headlight bulb of the Yamaha TW 200?
How do you replace the headlight bulb of the Yamaha TW 200?
Tw 200 In order to replace the headlight bulb of the Yamaha TW 200, you need to loosen the screws that secure the headlight assembly to its housing: the scr…
How to replace the motor oil in the Yamaha TW 200?
How to replace the motor oil in the Yamaha TW 200?
Tw 200 In this tutorial, we can see how to replace the motor oil in the Yamaha TW 200, a very simple and fast operation. First of all, make sure that the en…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos