Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Rkv 125
Part: Engine oil

How to change the engine oil on a Keeway Rkv 125? Follow this guide to proceed with the replacement. Position the motorcycle on its centre stand (if available), and using a spanner, unscrew the bolt from the oil sump (drain the fluid into a container). Unscrew the securing screws of the plate where the oil filter is located and replace it after topping up. Remove the plastic cap and top up the new fluid in the engine (use a funnel). Check the oil level with the dipstick located under the cap and close with the plastic cap after topping up.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil and Oil Filter on the Keeway RKV 125
Changing the Engine Oil and Oil Filter on the Keeway RKV 125
Rkv 125 Today, follow these steps to perform the routine maintenance service by changing the engine oil and oil filter on a Keeway RKV 125 motorcycle. First,…
How to Reset the ECU on a Keeway RKV 125
How to Reset the ECU on a Keeway RKV 125
Rkv 125 In this tutorial, you will see the main instructions to reset the control unit on a Keeway RKV 125, as well as on other models from the same manufact…
Oil Filter Replacement on Keeway RKV 125
Oil Filter Replacement on Keeway RKV 125
Rkv 125 Today, you will learn how to remove and replace the oil filter on a Keeway RKV 125. First, drain the old engine oil by unscrewing the oil drain plug …

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos