Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Rkf 125
Part: Engine oil

You can change the engine oil on a Keeway RKF 125 by loosening the drain plug located at the bottom centre of the bike: once the plug is removed, allow all the oil to flow into a suitably positioned container. Then, you can remove the oil filter located in the same position; once the new filter is installed, you can top up the oil. Pour in the necessary amount of oil found on the right side of the bike, ensuring everything is functioning correctly.

Posted on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine oil and oil filter replacement for the Keeway RKF 125
Engine oil and oil filter replacement for the Keeway RKF 125
Rkf 125 Learn how to perform routine maintenance by replacing the engine oil and oil filter on the Keeway RKF 125. First, unscrew the oil drain bolt located …
How to change the engine oil and oil filter on the Keeway RKF 125
How to change the engine oil and oil filter on the Keeway RKF 125
Rkf 125 This guide provides instructions for performing the routine maintenance service of changing the engine oil and oil filter on the Keeway RKF 125 motor…
How to Service the Keeway RKF 125
How to Service the Keeway RKF 125
Rkf 125 In this video, you will learn how to carry out the routine maintenance service (engine oil change, oil filter, and air filter) for a Keeway RKF 125. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos