Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Keeway K-Blade 125 Scooter?

Model: Keeway K Blade 125
Part: Clock

Video tutorial

In this tutorial, you will learn how to set the time on the Keeway K-Blade 125 scooter, a very simple and quick operation to perform after disconnecting the battery or when switching to daylight saving time. First, insert the key and turn on the instrument panel.

Then, press and hold the two buttons below the display until the time starts to flash. Adjust the hour with quick presses of the left button, change the minutes with the right button, and save the setting by pressing both buttons down together one last time.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Remove the Belt, Variator, and Clutch of the Keeway K-Blade 125
How to Remove the Belt, Variator, and Clutch of the Keeway K-Blade 125
K Blade 125 .. the belt, variator, and clutch of the Keeway K-Blade 125 scooter. First, place the scooter on the centre stand and begin unscrewing all the screws of.. …
How to replace the air filter on the Keeway K-Blade 125?
How to replace the air filter on the Keeway K-Blade 125?
K Blade 125 On the Keeway K-Blade 125, replacing the air filter involves unscrewing the screws that secure the cover containing the air filter, located on the ri…
How to Change the Gear Oil on a Keeway K-Blade 125?
How to Change the Gear Oil on a Keeway K-Blade 125?
K Blade 125 To change the gear oil on a Keeway K-Blade 125, loosen the bolt that secures the oil drain plug located near the rear wheel of the bike, right next t…

How to Reset the Oil Service on the Suzuki Skywave 650 Scooter?

In this tutorial, learn how to reset the oil service on the Suzuki Skywave 650 scooter, a very simple and quick operation to perform only after completing the required scheduled maintenance. First, insert the key, then press and hold the button located to the right of the display while simultaneously turning on the ignition. Once done, keep the button pressed for about 5 seconds, or for the time necessary to ensure the interval resets correctly. Finally, restart the ignition and check that the reset has been successful.

Watch the video!


by ScegliAuto

More videos