Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : Headlight

Kia Rio - Headlight

Headlight Kia Rio (2005-2011 / de, mk 2)

Kia Rio (2005-2011 / DE, MK 2)
How to adjust the headlights on the KIA Rio?
In this tutorial, we will see how to adjust the headlights on a KIA Rio, a very simple and quick operation. First, we position the vehicle in front of a …Read all…
Posted on 13 December 2025 by ScegliAuto
Kia Rio (2005-2011 / DE, MK 2)
How to Remove the Front Headlamp on a Kia Rio
In this guide, learn how to remove the front headlamp on a second-generation Kia Rio by following these simple instructions. First, open the bonnet of your car …Read all…
Posted on 7 May 2026 by ScegliAuto
Airbag (2) Alternator (1) Air conditioning (1) Car stereo (5) Battery (4) Transmission (1) Key (8) Trunk lock (1) Timing belt (7) V-belt (1) Onboard computer (2) Checks and maintenance (6) Dashboard (1) Bearing (1) Headlight (2) Fog lights (1) Air filter (1) Cabin air filter (3) Diesel fuel filter (1) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (2) Side marker bulb (1) Headlight bulb (9) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) License plate light (1) Handle (1) Engine (2) Transmission fluid (1) Engine oil (7) Clock (3) Door trim panel (5) Shift knob (4) Car door (1) Instrument cluster (1) Fuse box (27) Seat (1) Side mirror (1) Warning light – error code (10) (18) Tire pressure warning light (7) Service warning light (33) Brake drums and shoes (1) Fuel cap (1) Windshield wipers (4) Thermostat (1) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos