Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : Door trim panel

Kia Rio - Door trim panel

Door Trim Panel Kia Rio (2011-2017 / ub, mk 3)

Kia Rio (2011-2017 / UB, MK 3)
How to Remove the Door Panel of the 2017 Kia Rio
Removing the front passenger door panel of the 2017 Kia Rio is a simple and quick task that you can do yourself. To carry out the removal, you will need a star …Read all…
Posted on 9 May 2026 by ScegliAuto
Kia Rio (2011-2017 / UB, MK 3)
Removing the Tailgate Panel on Kia Rio
In today's tutorial, you will learn how to remove the tailgate panel on a third-generation Kia Rio by following these simple steps. First, open the boot and …Read all…
Posted on 3 May 2026 by ScegliAuto
Kia Rio (2011-2017 / UB, MK 3)
Removing the Door Panel on a Kia Rio
In this video, you will learn how to remove the inner door panel of a Kia Rio. First, take a sharp tool like a screwdriver and remove the square plastic cap …Read all…
Posted on 12 April 2026 by ScegliAuto
Kia Rio (2011-2017 / UB, MK 3)
How to Remove the Rear Door Panel on Kia Rio
To remove the rear door panel (left side) on a Kia Rio, disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the screws …Read all…
Posted on 21 March 2026 by ScegliAuto
Kia Rio (2011-2017 / UB, MK 3)
Door Panel Disassembly for Replacement
The tools needed for this operation are: a flat screwdriver, a Phillips screwdriver, a Torx key, and a spatula. Remove the handle cover and unscrew the …Read all…
Posted on 10 February 2026 by ScegliAuto
Airbag (2) Alternator (1) Air conditioning (1) Car stereo (5) Battery (4) Transmission (1) Key (8) Trunk lock (1) Timing belt (7) V-belt (1) Onboard computer (2) Checks and maintenance (6) Dashboard (1) Bearing (1) Headlight (2) Fog lights (1) Air filter (1) Cabin air filter (3) Diesel fuel filter (1) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (2) Side marker bulb (1) Headlight bulb (9) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) License plate light (1) Handle (1) Engine (2) Transmission fluid (1) Engine oil (7) Clock (3) Door trim panel (5) Shift knob (4) Car door (1) Instrument cluster (2) Fuse box (32) Seat (1) Side mirror (1) Warning light – error code (10) Tire pressure warning light (26) Service warning light (35) Brake drums and shoes (1) Fuel cap (1) Windshield wipers (4) Thermostat (1) Blower motor (1) Steering wheel (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos