Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Tailgate Panel on Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Door trim panel

In today's tutorial, you will learn how to remove the tailgate panel on a third-generation Kia Rio by following these simple steps. First, open the boot and remove the side plastic covers using a thin lever; then, unscrew the screws located underneath to remove the tailgate panel, as shown in the video. At this point, you will have access to the tailgate lock (which will be removed later) and the interior; for reassembly, simply apply the reverse procedure!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Rio (2011-2017 / UB, MK 3) Below are the main instructions on how to remove and replace the boot lock on a Kia Rio in simple steps. First, open the rear boot lid and start remo…
Kia Rio (2011-2017 / UB, MK 3) In this video, you will learn how to remove the inner door panel of a Kia Rio. First, take a sharp tool like a screwdriver and remove the square plas…
Kia Rio (2011-2017 / UB, MK 3) Removing the front passenger door panel of the 2017 Kia Rio is a simple and quick task that you can do yourself. To carry out the removal, you will n…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos