Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Boot Lock on a Kia Rio

Model: Kia Rio UB, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Trunk lock

See other generations:
Video tutorial

Below are the main instructions on how to remove and replace the boot lock on a Kia Rio in simple steps. First, open the rear boot lid and start removing the trim from the tailgate by unscrewing the fixing screws; then unscrew the screws of the boot lock, disconnecting the release cable to remove it, as shown in the video.

At this point, replace and install the new boot lock, checking its proper operation before refitting the tailgate trim.


Posted on 22 April 2026 by ScegliAuto


Related tutorials

Kia Rio (2011-2017 / UB, MK 3) In today's tutorial, you will learn how to remove the tailgate panel on a third-generation Kia Rio by following these simple steps. First, open the b…
Kia Rio (2011-2017 / UB, MK 3) Before you can start, open the rear doors of your Kia Rio. Then, enter the cabin. This will allow you to reach the clips that hold the rear seats in …
Kia Rio (2005-2011 / MK 2, DE) Below we will see the steps on how to program the remote key for the Kia RIO. First, let's get inside the vehicle and make sure all the doors are clo…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos